Thursday, 3 December 2009

Measuring Moisture, Humidity and Condensation

Surveyors involved with identifying the causes of dampness in buildings may need to know the humidity and temperature levels in the building, as well as moisture levels in walls / floors. Effectively undertaking seven different types of readings:
1. Surface moisture content
2. Sub-surface moisture content
3. Relative humidity (%RH)
4. Ambient temperature
5. Surface temperature
6. Dew point temperature
7. Condensation

Unfortunately, the readings for moisture content and humidity are not the same. Worse still, they can not converted and require different types of instruments for each task.

If you require both moisture and humidity readings, then there is a simple solution.


Protimeter MMS
The Protimeter MMS (Moisture Measurement System) combines a moisture and humidity meters functionality into one system, effectively five instruments in one unit.

By utilising the operational modes of the Protimeter MMS, the operator can identify the scale and extent of a moisture problem. Establishing if it is due to condensation, rising dampness or lateral ingress. This leads to more thorough and reliable diagnosis.

1. Moisture Meter Modes
The Protimeter MMS may be used as a moisture meter in two operational modes. Measure mode uses pin-type electrodes for surface moisture and Search mode uses a radio frequency technology to provide moisture measurements beneath the surface.

2. Hygrometer Mode
The Protimeter MMS uses the interchangeable Hygrostick sensor to measure humidity and temperature. The Hygrostick may be connected directly into the Protimeter MMS instrument for measuring conditions in rooms and other environments or via an extension lead.

The facility makes the Protimeter MMS an ideal instrument to measure the Equilibrium Relative Humidity (ERH) of walls and floors using the Hygrosticks that have been placed into pre-drilled clearance holes or the humidity box for measuring ERH levels of floors.


3. Condensator Mode
The condensator mode is used for confirming the presence of condensation and risk assessment by comparing surface temperatures, with the dew point of the environment under investigation. When used with the surface temperature sensor the Protimeter MMS can make the following measurements:
- Relative humidity
- Ambient temperature
- Dew point
- Surface temperature
- Difference between surface temperature and dew point


For more information on the Protimeter MMS - http://www.damp-meter-direct.co.uk/Protimeter-MMS.htm


Tuesday, 1 December 2009

Leica Roteo 35G - 400% More Visible



When undertaking levelling tasks over a large area, the beam of a red laser can be hard to see and will commonly require a detector eye to find the beam.

Alternatively a green beam laser level operates through a higher light range and is four times more visible to the human eye. With green beam laser levels, the laser beam provides better visibility in very bright conditions and over long distances.


Leica Geosystems have recently launched an enhanced interior laser level, the Leica Roteo 35G ‘Green Beam’. Providing all the characteristics of the very popular Leica Roteo 35, the new green beam option is the preferred choice for interior levelling tasks over long distances.

All-round perfection in every condition
On ceilings or walls, on the floor or on a tripod, the Leica Roteo 35G rotating laser is a multitalented performer. You can use it to work precisely on many indoor tasks in which levelling or aligning is required in very bright conditions and over very long distances.


400% More visibile
The pioneering green laser beam is four times more visible to the human eye. So you have the best possible visibility.






Installing ceilings and wallsWith its motorized wall mount, the Leica Roteo 35G can be positioned on the wall and moved effortless backwards and forwards using the combined remote control/detector unit, allowing you to quickly suspend ceilings and erect drywalls.

Marking out right angles
The Leica Roteo 35G is also a great help in the vertical plane. The combination of a vertical 360° reference plane and plumb beam simplifies layout, allowing you to work more accurately and efficiently on interior works.

Very VersatileThe integrated motorised wall mount, bright visible beam, horizontal and vertical lines or an exact 90° angle – it is no problem for the Leica Roteo 35. The rotating laser can automatically self-level for inclined set-ups of up to ± 4.5°. Scanning mode makes work easier by improving visibility in bright lighting conditions.

Motorised Wall MountThe Leica Roteo 35 laser level features a motorised wall mount, allowing for the instrument to move easily up and down when attached to the wall for ceiling grid installations. All operations can be controlled from the remote control and RRC350 laser detector eye.

HI AlertThe instruments H.I. (height of instrument) Alert system will sound an alarm if the laser is disturbed, stopping the head from rotating to prevent inaccurate readings.



For more information on Leica Roteo 35G - www.surveyexpress.co.uk

Monday, 23 November 2009

Leica Lino L2 Cross Line Laser


Like most products developed and manufactured by Leica Geosystems, the Leica Lino cross line laser, there is no comparison.

The Leica Lino L2 cross line laser provides a crisp, sharp, precise bright red laser beam, both in horizontal and vertical axis. When placed side by side against any other cross line laser, the Leica Lino L2 wins hands down. Not just for the ergonomic design, but more importantly for the quality of the instrument and the brightness of the beam.



Red Dot Award Winner
The Leica Lino L2 is the first line laser to be awarded with the prestigious Red Dot Award for excellent product design.

Being awarded a Red Dot means that the Leica Lino L2 is the best for design and business. The red dot is an internationally recognised quality label that is judged by an international jury made up of renowned designers and design experts. Only the best is awarded the Red Dot!

Click for more information - http://www.red-dot.org/


Self-levellingIt is not necessary to tediously align the Leica Lino L2 to obtain horizontal or vertical lines. The internal compensator automatically levels the beam within minor angular misalignments of ± 4°. If the instrument is outside this tolerance, the device does not project any lines. Errors are prevented.

Excellent visibility
The Leica Lino L2 is equipped with Leica's Power Range Technology to achieve an excellent visible laser line at greater distances. When utilised with the Leica LL2 detector eye the range can be increased to 30m inside or out.

Very high accuracy
With projection and levelling accuracy of ±1mm, the Leica Lino L2 is one of the most precise instruments in its class.

Very easy to use
With only one button operation, the Leica Lino L2 is quick and easy to operate. Setting the instrument up is child's play, with the magnetic multifunction adapter supplied.

Wall Bracket / Multifunction AdapterThe Leica Lino L2 magnetic multifunction adapter can be utilised as a mini tripod or as wall bracket. The design incorporates a magnetic plate allowing the bracket to be positioned against a metal surface.

Click for more information - Leica Lino L2 Cross Line lasers

Friday, 13 November 2009

Protimeter Mini Moisture Meter

Most widely used moisture meter

If you require a simple mosture meter for detecting surface damp then the Protimeter Mini is the referred choice. Small, compact and ideal for general purpose moisture detection, the Protimeter Mini is ideal for checking the moisture levels for a vast range of quality control and dampness diagnosis applications.


Simple readingsDirect readings of surface moisture are taken through two small pins. A colour coded scale enables the user to assess the moisture level at a glance.

The numerical values represent the actual percent moisture content of wood (%MC) and the wood moisture equivalent (WME) of other materials. The Protimeter Mini can be used to determine if the fabric of a building is in a dry, borderline or damp condition.

Design enhancementsThe Protimeter Mini incorporates a range of design refinements and features that make it much simpler to use. The stylish instrument case fits snugly in the hand with a rubber edging for comfort, so it can be used effortlessly for long periods. The new display is very bright for visual clarity.

If the instrument is inadvertently left on, the energy saving feature automatically switches off the instrument after five minutes to conserve the battery life.



Click for information - www.surveyexpress.co.uk

Click for information - www.damp-meter-direct.co.uk

Thursday, 12 November 2009

Bosch DLE Laser Measuring Instruments



Robert Bosch Ltd have recently introduced two new range laser measuring instruments into their Blue Professional range - Bosch DLE 40 & Bosch DLE 70.

Bosch DLE40
The Bosch DLE40 is the new entry level laser measuring instrument, designed for simple interior measuring requirements. The basic laser measuring functions are easy to access and allow for quick direct measuring applications.

The Bosch DLE40 has been designed for precise indoor measuring to a range of 40 metres and an accuracy of 1.5mm. Measuring area and volume calculations can be easily undertaken with the Bosch DLE40.

Simply choose the function by pressing their individual key and follow the on-display guide. Converting between metric and imperial measurements can be undertaken through the m/ft key. Measuring reference from the front allows the operator to measure from a surface i.e. end of a table back to a wall. This instrument is ideal for all interior designers, home inspectors and kitchen, bedroom, bathroom fitters.

Benefits and Features
• Measuring accuracy +/- 1.5MM
• Measuring Range – 40 metres (Interior only)
• Small, Pocket size
• Clear display
• Area, Volume measuring
• Easy to use - one function per button
• Robust – water and dust resistant to IP54


Bosch DLE70
The Bosch DLE70 laser measure supersedes the top selling Bosch DLE 50 rangefinder, adding extra measuring distance and new measuring functions. The Bosch DLE70 has is accuracy of 1.5mm and a range of 70 metres delivered by utilising the latest Bosch developments in laser measuring technologies.

This ensures that the Bosch DLE70 offers trustworthy measurements every time. The Bosch DLE70 has the ability to measure from the front or the back of the device as well as utilising the new flip out metal stop pin to reach into difficult corners.

The new style robust case on the Bosch DLE70 has a rubberised grip with large rubber buttons that have a firm and precise feel when pressed. The Bosch DLE70 has easy to use menus that offer a range of laser measuring functions including area, volume and indirect height measuring functions using Pythagoras. The add and subtract buttons help with running measurements to give the user a quick measured total.

Benefits and Features
• Measuring accuracy +/- 1.5MM
• Measuring Range – 0.05 – 70 metres
• Small, Pocket size
• Clear display – large numbers
• Features: Volume, Area, Pythagorus
• Metric and Imperial Measurements
• Bosch Technology: Laser pin point accuracy
• Robust – water and dust resistant to IP54
• Size: 100 x 58 x 32mm

Click for more information - Bosch Laser Measure


Tuesday, 10 November 2009

Fugenex Damp Protect

Fugenex Damp Protect is a simple innovative method for measuring humidity through an irreversible humidity indicator.
The Fugenex Damp Protect indicators provide early warning signals of humidity and help to indicated if there is a condensation problem rather than a structural fault.

There are many ways to get an on-the spot account of the relative atmospheric humidity, however, there are few ways of easily measuring the relative humidity over a period of time, i.e. how long something has been exposed to humidity above a certain level.


Fugenex Damp Protect sensors, provide a physical-chemical principle, show how long the relative humidity has exceeded a predetermined level. The reading on the indicator is non-reversible. This means that even if the relative humidity temporarily falls below the humidity level, the maximum humidity reading remains unchanged.

Fugenex sensors have a robust design that assures high reliability. The indicators are easy to read and understand, as the length of the reading is proportional to the time that exposure to humidity has exceeded the predetermined level.

Click for more information - www.surveyexpress.co.uk

Click for information on damp meters - www.damp-meter-direct.co.uk

Monday, 9 November 2009

The next generation gas monitor - BW GasAlertQuattro



BW Technologies have launched their new generation BW GasAlertQuattro gas detector which has been designed to provide enhanced confidence through rugged reliability and enhanced features.

Several key customer requirements have been addressed with the new BW GasAlertQuattro, improved screen to check the instrument, improved gas sensors and more importantly confidence in the instrument.


Large Clear Display
The BW GasAlertQuattro features a larger LCD display with easy to identify icons that indicate operational information, such as bump test and calibration status for simplified onsite auditing. A large heart icon pulses continually during normal operation to indicate that the instrument and environment is OK.

However, if the instrument alarms a new hazardous symbol will be displayed, highlighting the alarm.

IntelliFlash
The IntelliFlash, a green LED that continuously flashes to let the safety manager know their crew is safe, the site is compliant and the job is productive. That means no manual checks, no time spent inspecting just a quick visual scan of the area provides assurance all is well in minutes, not hours. So safety managers can spend more time on the job, not auditing equipment.

The audible alarm is different if the battery is low to a gas alarm.

Improved Sensors
BW has rigorously investigated all the sensors available on the open market and selected the best sensors for reliability and overall performance. With over 10 billion field hours the Surecell range of sensors meets customer demands for improved sensor design.

Longer Running Times
The BW GasAlertQuattro delivers longer run times that allow workers do more in all extremes the work environment demands. The interchangeable battery pack means customers can do more and spend less. They need to buy only one monitor because the battery pack transfers in the time it takes workers to change shifts. So there’s never any downtime with the personal gas monitor that’s ready for work 24 hours/7 days a week.

Single Button Operation
The BW Gas Alert Quattro utilises a single one button operation. The push button has been design for easy operation whilst wearing gloves.

Features

  • IntelliFlash verifies operation and compliance
  • One-button operational simplicity
  • Easy to identify icons
  • Field-proven Surecell sensors
  • Easy-to-read, LCD displays all gas concentrations simultaneously
  • Audible, visual and vibrating alarm
  • Extended alarm bars
  • Flexible, interchangeable battery option
  • Full function self-test is initiated upon activation and runs continuously during operation
  • Heartbeat pulses continually during normal operation
  • Extensive data and event logging capability
  • User-options, such as tamper-proof operati
  • Multi-language support
  • Compatible with MicroDock II calibration system

Click for more information - http://www.surveyexpress.co.uk/Safety-Equipment/Gas-Detection/c-1-110-112/


Click for more information -http://www.surveyexpress.co.uk/Safety-Equipment/Gas-Detection/BW-Gas-Alert-Quattro---Gas-Detector/p-110-112-890/

Friday, 6 November 2009

Leica Rugby Goes Digital

Leica Geosystems have recently revamped their laser leveling range to include improved detector eyes.

Since their original launch, the Leica Rugby laser level range surpasses all others for quality, reliability and field friendly features. We should know, all our hire fleet are Leica Rugby’s!

So it is natural for a manufacture to enhance their range and once again Leica Geosystems have generated the perfect 'Set Piece' by marrying together the new detector eyes with leading laser leveling range.

Value for all general construction applications
The Leica Rod Eye Basic is a great receiver. Offering two accuracy settings, high / low audio output and a 300 m (1000 ft) range, the Rod Eye Basic is a quality receiver that is ready to work for you.

For more information – Leica Rod Eye Basic




Exceptional quality - great features
The Leica Rod Eye Plus is a full featured receiver with proven performance in the field. Three bright LED’s, nine channel arrow display and audio output provide the user with all the information needed to lock on the laser beam and get the job done right. Additionally, the double beep beam finder, last beam strike memory, laser low battery indication and the reversible clamp for rectangular or oval rods put the Digital and Plus at the top of the list for today’s contractor.

For more information – Leica Rod Eye Plus Detector Eye



Digital technology that expands your options
The Rod Eye digital is the top of the line receiver with digital readout, half millimeter accuracy, and strobe rejection. The Digital has a 127 mm (5 inch) pickup window which is the result of truly unique technology and provides the Digital with the best accuracy in the industry.

For more information – Leica Rod Eye Digital Detector Eye



For more information of Leica Geosystems range of laser levels:

Leica Rugby 610
Leica Rugby 620
Leica Rugby 640
Leica Rugby 670
Leica Rugby 680
Leica exterior laser levels
Leica interior laser levels



Thursday, 5 November 2009

Leica Builder - True Power on Construction Sites

Leica Geosystems have recently launched a new range of theodolites and total stations for construction sites. The Leica Builder range incorporates similar features of the larger more powerful surveying and engineering ranges but into a simpler less complicated package.

Starting with the Leica Builder 100 electronic theodolite all the way up to the Leica Builder 500, the range features the same chassis and software configurations. This allows operators to easily move to the higher specification models without retraining.

Don't be fooled into thinking the Builder range are low specification. Key options commonly featured in the Leica's TS09 range have been incoprated, like a USB memory stick which allows the operator to transfer measured data directly to a PC, or for real time data transfer use the Bluetooth wireless link. How about long range reflectorless measuring or improved onboard software.

Greater emphasis on intergration with third party surveying software. Vendors link Greabert have launched new programs directly for the Leica Builder range, allow both the total stations and hand-held laser measures to utilise the same package. A new rugged military specification field PDA – Leica DX10 allows the operator to run software, collect data and operate the instruments.

So Leica have everything in one package!

Leica Builder 100
With a laser plummet for simple and fast setup over control line, dual axis compensation for accurate plumbing, endless drives eliminating steps, audible notice for 90° turns, graphical leveling aid for fast and convenient setup and IP55 rating, the Leica Builder 100 is an outstanding theodolite.


For more information – http://www.surveyexpress.co.uk/




Leica Builder 200
Traditional layouts require many steps and manipulations. The Leica Builder reduces these steps. As such the Leica Builder 200 adds benefit by reducing the number of set-ups and offers laser-aided layouts up to 80m/260ft. Its serial interface allows connection to any 3rd party device/program. 3 languages loadable.


For more information – http://www.surveyexpress.co.uk/



Leica Builder 300
Call up plan data and record points eliminates read and write errors, data exchange via industrial grade USB stick simplifies data handling, a direct DXF download function, tracking mode, setup any-where function, optional volumes calculation and laser distance measurements up to 120m/400ft make the Leica Builder 300 a real workhorse.


For more information – www.surveyexpress.co.uk


Leica Builder 400
With an extended working range to prisms of up to 500m/1600ft (optional 3500m/2.2mi), a full alpha-numeric keyboard for rapid entry/recall of point numbers (cell phone style use), short range laser distance measurements with 15m/50ft for quick as-builds of inaccessible points and a huge memory of 50’000 points, Leica Builder 400 is the high performer in its league.


For more information – www.surveyexpress.co.uk/



Leica Builder 500
The “flagship” of the Leica Builder Series equipped with all of the above features plus wireless communication via Bluetooth, full laser distance measurements up to 250m/820ft and up to 1.5mm accuracy at 100m covers the full range of tasks to be performed on any construction site. An -30°C option is available additionally.


For more information – http://www.surveyexpress.co.uk/

Wednesday, 14 October 2009

The Highest Measuring Accuracy

When taking measurements, there is only one way

Laser measuring - Why?

Tape Measures


Take a tape measure and measure a room. Commonly there will be furniture, tables and expensive ornaments in the way. On most occasions two people will be needed to measure over or around these obstacles. It’s quite a time consuming task. Oh yes a try not to break anything!

In order to save time, you may use an ultra-sonic tape measure. By their very nature, ultra-sonic devices are estimators and are not precision measuring instruments. If
you take ten measurements of a room, you will find that 8 measurements are different.


Ultra-Sonic

Ultra-sonic devices emit a sound wave similar to ships sonar and measuring the first returning signal. If you measure a living room, the signal will bounce of furniture, tables, plants and curtains. Anything in front of the wall, will return a signal before you achieve a measurement from the wall it’s self.

Ultra-sonic instruments are cheap but not accurate. You would spend more time taking a measurement than with a tape measure.



If you want speed and accuracy, a laser measuring device is the preferred choice.

Laser Measure


A small laser beam is emitted and can be accurately positioned onto the target area. When a measurement is taken, millions of light waves are sent through the laser beam. The instrument measures the time it takes to send and receive these signals. In most cases this happens in a fraction of a second.

With a laser beam the small red dot can be position over or under an item. The laser will not be affected by surrounding obstacles and will only measure the distance to the dot.

This allows the operator to measure outdoors to a range of 200 meters. With advances in the Leica Disto technology, digital point finders help to position the laser even if you can not see the red dot. The best bit, only one person is required and it only takes a fraction of a second.

The best laser measuring device is the Leica Disto.


Additional information on the Leica DISTO range can be found at www.theoriginallaserdistancemeter.co.uk
www.surveyexpress.co.uk

Thursday, 17 September 2009

Measuring Outside

When measuring outdoors, you may not be able to see the red laser dot over a distance of 20 metres or 65 feet. The red laser dot will be visible on the target but the human eye is not powerfull enough to see the laser at a distance.

Although the Leica Disto D3 is more than capable of measure outdoors, without a viewfinder you may not be able to locate the laser dot. Try to use the red laser glasses. This will enhance the laser dot and at the same time you could start a new fashion!

Digital Pointfinder
Alternatively invest in the new Leica Disto D5 or Leica Disto D8 models. Leica have introduced the first digital pointfinder into these instrument, allowing the user to view the target on the large colour screen. Simply aim the instrument, view through the screen and measure.

This is a very big step in the evolution of laser measuring. In simple terms a digital camera incorporated into the instrument collects the image and allows the operator to view through the crystal clear display.

For more information on the Leica DISTO D5, please visit http://www.theoriginallaserdistancemeter.co.uk/leica-disto-d5.htm

For more information on the Leica DISTO D8, please visit http://www.theoriginallaserdistancemeter.co.uk/leica-disto-d8.htm


Additional information on the Leica DISTO range can be found at www.theoriginallaserdistancemeter.co.uk
www.surveyexpress.co.uk

Wednesday, 16 September 2009

Leica DISTO D8 laser measure


Leica Geosystems has introducted the most advanced laser measuring instrument - Leica DISTO D8 featuring the highest measuring accuracy (±1mm) over a distance of 200m and Bluetooth wireless technology. Incorporating a digital viewfinder with large colour display, the Leica DISTO D8 is the perfect inside and outdoor measuring.


Bluetooth
With intergrated Bluetooth technology, measuring results can be wirelessly and accuratly transferred to a PC, Pocket PC or table. All measurements can be inputed directly into Excel, Word, Access, AutoCAD and many more.


Free Software
Delivered as part of the package Leica are shipping with the Leica DISTO D8 a transfer software which manages the communication between your software and the laser measure. The AutoCAD plug-in allows convenient planning and drawing with your AutoCAD software.


Digital Pointfinder
The integrated digital pointfinder with a 4x zoom makes finding the target at long distances much easier. Its high resolution capability provides a sharp, crystal-clear image displayed through the large colour display.


Large Colour Display
The Leica DISTO D8 features a new large, high resolution colour display presents the measurement results and additional information in an easy to read format.


Tilt Sensor
Thanks to the in-built tilt sensor, you can quickly and simply measure tilts up to ± 360°. The tilt sensor also allows you to measure absolutely horizontally or measure past obstructions (horizontal distance).


Long Range Mode
The Long Range (LR) mode can be selected to allow measurements over long distances and in sunny conditions to be recorded without problems.


Multi-functional End-piece
Building upon the Leica DISTO D5, the Leica DISTO D8 features a multifunctional endpeice. When you need to measure from a corner, simply flip out the end piece and take the measurement. The instrument will automatically sense the position of the bracket and adjust the measurement accordingly.


Multiple functions
The Leica DISTO D8 can also calculate areas, volumes, room dimensions, various types of Pythagorean functions and a new Trapezium function. A time delay release and enough memory for up to 20 measurements finish off the instruments wide range of functions – a concept designed to make your work easier.
For more information on the Leica DISTO D8, please visit http://www.theoriginallaserdistancemeter.co.uk/leica-disto-d8.htm

Additional information on the Leica DISTO range can be found at http://www.theoriginallaserdistancemeter.co.uk

Leica DISTO D5 laser measure


Leica Geosytems has introducing the advanced laser measuring instrument - Leica DISTO D5 featuring the highest measuring accuracy (±1mm) over a distance of 200m. Incorporating a digital viewfinder with large colour display, the Leica DISTO D5 is the perfect outdoor measuring instrument.

Digital Pointfinder
The integrated digital pointfinder with a 4x zoom makes finding the target at long distances much easier. Its high resolution capability provides a sharp, crystal-clear image displayed through the large colour display.


Large Colour Display
The Leica DISTO D5 features a new large, high resolution colour display presents the measurement results and additional information in an easy to read format.

Long Range Mode
The Long Range (LR) mode can be selected to allow measurements over long distances and in sunny conditions to be recorded without problems.


Tilt Sensor
Thanks to the in-built tilt sensor, you can quickly and simply measure tilts up to ± 45°. The tilt sensor also allows you to measure absolutely horizontally or measure past obstructions (horizontal distance).


Trapezium Function
The Leica DISTO D5 features a trapezium function to allow the operator to determine roof slopes and frontage areas.

Multi-functional End-piece
The Leica DISTO D5 features a multifunctional endpeice. When you need to measure from a corner, simply flip out the end piece and take the measurement. The instrument will automatically sense the position of the bracket and adjust the measurement accordingly.


For more information on the Leica DISTO D5, please visit http://www.theoriginallaserdistancemeter.co.uk/leica-disto-d5.htm


Additional information on the Leica DISTO range can be found at http://www.theoriginallaserdistancemeter.co.uk/

Leica DISTO D3 laser measure


Leica Geosystems has introducted the Leica DISTO D3, providing a multi-functional instrument combined with the highest level of accurracy and digital tilt sensor for recording incline measurments. This small multi-functional laser measurer is simple and quick to use but packed with ground breaking technology all at a price to suit every pocket.


Tilt Sensor
The instrument's inbuilt tilt sensor quickly and simply determines tilts up to ± 45°. This will allow you to measure the angle of a slope or the angle of a corner in a room.


Multi-functional Endpeice
A feature taken from the Leica DISTO A5 is the multifunctional endpeice. When you need to measure from a corner, simply flip out the end piece and take the measurement. The instrument will automatically sense the position of the bracket and adjust the measurement accordingly.


Light Sensor
A built-in sensor detects if the environment is dark and switches on the illumination of the keypad and display. You can also measure in the dark without any problem.


Multiple functions
The Leica DISTO D3 can also calculate areas, volumes, room dimensions and various types of Pythagorean functions. A time delay release and enough memory for up to 20 measurements finish off the instruments wide range of functions – a concept designed to make your work easier.

For more information on the Leica DISTO D3, please visit http://www.theoriginallaserdistancemeter.co.uk/leica-disto-d3.htm

Additional information on the Leica DISTO range can be found at http://www.theoriginallaserdistancemeter.co.uk/

Leica DISTO D2 laser measure



Leica Geosystems has introducing the world’s smallest laser distance meter, the all new Leica DISTO D2. Even though it is small and elegant, this Indoor laser measuring device is packed with features. It is only the size of a mobile phone but it is ergonomically designed and very easy to use for the novice user.


Handy and easy-to-use
The new ergonomic and compact design of the Leica DISTO D2 sets this instrument apart from all other measuring devices. The Leica DISTO D2 is the smallest instrument on the market, sits securley in your hand and fits inot a pocket.


Clear Display
The Leica DISTO D2 features a three line display, showing single and final results of different measurements, such as area and volume calculations, at the same time. The results are easy to read, even in the dark, thanks to the illuminated display.


Simply clever
At the touch of a button, distances can be measured and areas or volumes can be calculated with fast, reliable results.


Memory
The last ten measurements taken are stored automatically and can be recalled at any time. Addition and subtraction of distances and areas is child’s play with the Leica DISTO D2.


For more information on the Leica DISTO D2, please visit http://www.theoriginallaserdistancemeter.co.uk/leica-disto-d2.htm


Additional information on the Leica DISTO range can be found at http://www.theoriginallaserdistancemeter.co.uk/