The Crowcon Gas-Pro is the newest member of the Crowcon personnel gas monitor range. Although only launched a few months ago, many customers have converted over to this superb instrument.
As discussed in my original blog ‘Confined Space Entry – is your gas detector right for the job?’, the Crowcon Gas-Pro has been designed to allow more sensor to be utilised with the instrument will less cross sensitivity or conflict. With the introduction of further sensors, the instrument can be configured for a wider range of applications other than confined space.
The following list provides scheduled dates of sensor releases
Scheduled for release in December 2011:
0-100 ppm ammonia (NH3)
0-5 ppm chlorine (Cl2) diffusion
0-1 ppm chlorine dioxide (ClO2) diffusion
0-20 ppm sulphur dioxide (SO2) H2S filtered
0-1 ppm ozone (O3) diffusion
0-100 ppm nitric oxide (NO)
0-20 ppm nitrogen dioxide (NO2)
0-2000 ppm carbon monoxide (CO) H2S and SO2 filtered
0-500 ppm carbon monoxide (CO) H2S and SO2 filtered
0-100 ppm hydrogen sulphide (H2S)
0-2000 ppm carbon monoxide (CO) H2 filtered
Scheduled for release from February 2012:
0-100% LEL pellistor type butane, pentane, toluene, ethylene & propane
Scheduled for release from March 2012:
0-100% LEL IR type methane, butane, pentane, toluene, ethylene & propane
This is not an exhaustive list – others to be included are: Dual IR 0-100% LEL / 0-100% Volume, 0-100% LEL hydrogen (H2), ppm measurement of VOC’s PID type, high level ammonia, ethylene oxide, ethanol, isopropyl alcohol, jet fuel (5), methanol, hydrogen chloride, hydrogen cyanide, hydrogen fluoride, methyl ethyl keytone, phosphene and phosgene.
Keep checking out our safety website for further configurations. If you have any requirements call our safety team on 0845 2575268.
Click for more information on the Crowcon Gas-Pro
